Raider 2WD V6-3.7L (2008)
Trailer Connector: Service and Repair
TRAILER TOW CONNECTOR
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Reach behind the bracket (4) on the trailer hitch receiver (2) to access and disconnect the connector (3) of the body wire harness from the 7- way
trailer tow connector (1), or to disengage the 4-way trailer tow connector (5) from the bracket.
3. Remove the four screws (6) that secure the 7-way trailer tow connector to the bracket.
4. Remove the 7-way trailer tow connector from the bracket.
INSTALLATION
1. Position the 7-way trailer tow connector (1) into the bracket (4) on the trailer hitch receiver (2).
2. Install and tighten the four screws (6) that secure the 7-way trailer tow connector to the bracket. Tighten the screws to 4 N.m (35 in. lbs.).
3. Reach behind the bracket to access and reconnect the connector (3) of the body wire harness to the 7-way trailer tow connector, or to engage the
4-way trailer tow connector (5) to the bracket.
4. Reconnect the battery negative cable.
