Raider 2WD V6-3.7L (2008)
1. Install the latch assembly (2) and install the screws (1).
2. Tighten the screws to 12 N.m (105 in.lbs.).
3. Install the cable hanger push pins (3) and seat fully.
4. Connect the cable (1) to the door handle (2).
1. Install the latch assembly (2) and install the screws (1).
2. Tighten the screws to 12 N.m (105 in.lbs.).
3. Install the cable hanger push pins (3) and seat fully.
4. Connect the cable (1) to the door handle (2).