Raider 2WD V6-3.7L (2008)
STRIKER - UPPER LATCH
REMOVAL
1. Using a grease pencil or equivalent, mark the position of the striker to aid installation.
2. Remove the screws (2) and remove the striker (1).
INSTALLATION
1. Position the door latch striker (1) onto the vehicle and loosely install the two screws (2).
2. Align the door latch striker using the reference marks made during the removal procedure and tighten the screws to 28 N.m (21 ft.lbs.).
3. If necessary, adjust the door latch striker.
