Raider 2WD V6-3.7L (2008)
CAUTION: Be careful not to crease the headliner.
1. Position the headliner in the vehicle through the left door opening.
2. Connect the headliner wire harness connector (1) to the center high mounted stop lamp.
3. Raise the rear of the headliner (7) to the roof panel and install the two coat hooks.
4. Raise the front of the headliner to the roof panel and install the sun visor supports (3).
5. Install the left front seat.
6. Install the right front seat headrest.
7. Connect the wire harness connector (5) located at the right A-pillar.
8. If equipped, connect the headliner wire harness connector (2) to the inside rear view mirror.
9. If equipped, install the overhead console.
10. Install the sun visors (4).
11. If equipped, install the front dome lamp.
12. Install the A-pillar trim panels.
13. If equipped, install the rear dome lamp.
