Raider 2WD V6-3.7L (2008)
Sunroof / Moonroof Switch: Description and Operation
Sunroof Control Switch
SUNROOF CONTROL SWITCH
DESCRIPTION
Vehicles equipped with a power sunroof utilize a sunroof control switch. On this model, the sunroof control switch is located in the overhead console, in
between the two reading lamps. The switch is mounted in the overhead console with four plastic retaining tabs, molded into the switch housing.
This switch incorporates six selections of operation open, auto open, close, auto close, auto vent and vent. The individual switches in the sunroof control
switch unit cannot be repaired. If one switch is damaged or faulty, the entire sunroof control switch unit must be replaced.
OPERATION
With the operation of the sunroof control switch, voltage is directed to the sunroof motor, through the switch contacts or control module. If the control
switch is depressed and held depressed the voltage signal is controlled manually through the switch contacts, so when the switch is released the sunroof
stops.
