Raider 2WD V6-3.7L (2008)
6. Remove the nuts (1) attaching the support plate (2) to the axle and remove the support plate (2).
INSTALLATION
1. Install support plate (2) on axle flange. Tighten attaching nuts (1) to 68 Nm (55 ft. lbs.).
6. Remove the nuts (1) attaching the support plate (2) to the axle and remove the support plate (2).
INSTALLATION
1. Install support plate (2) on axle flange. Tighten attaching nuts (1) to 68 Nm (55 ft. lbs.).