Raider 2WD V6-3.7L (2008)
3. Apply Engine RTV sealer to front cover as shown (3) using a 3 to 4 mm thick bead.
4. Install cover. Tighten fasteners in sequence as shown in to 58 Nm (43 ft. lbs.).
5. Install crankshaft damper.
6. Install the A/C compressor.
7. Install the generator.
8. Install accessory drive belt tensioner.
9. Install radiator upper and lower hoses.
10. Install both heater hoses.
11. Install the radiator fan.
12. Fill the cooling system.
13. Connect the battery negative cable.