Raider 2WD V6-3.7L (2008)
Seat Belt Reminder Lamp: Testing and Inspection
STANDARD PROCEDURE
CUSTOMER PROGRAMMING SEQUENCE
NOTE: The following sequence of events must occur within 60 seconds of the ignition switch being placed in the ON position in order for the
programming to be completed successfully.
1. With all doors closed and the ignition switch in any position except ON or START, buckle the driver side front seat belt.
2. Turn the ignition switch to the ON position and wait for the seatbelt indicator reminder function to conclude (about six seconds).
3. Unbuckle and buckle the driver side front seat belt three or more times, ending with the belt buckled.
4. Turn the ignition switch to any position except ON or START to toggle the BELTMINDER feature from its current setting (from active to
inactive, or from inactive to active). A single chime tone will provide an audible confirmation that the programming sequence has been
successfully completed.
