Raider 2WD V6-3.7L (2008)
RETURN HOSE - COOLER TO RESERVOIR
1. Install the return hose to the vehicle.
2. Reconnect the return hose (4) at the cooler (1).
3. Reconnect the return hose (4) at the reservoir (2) with hose clamp.
4. Refill the power steering system.
RETURN HOSE - WITHOUT COOLER
1. Install the return hose to the vehicle.
2. Reconnect the return hose (4) at the reservoir (2).
3. Reconnect the return hose (4) at the gear (6). Tighten the tube nut to 37 Nm (27 ft. lbs.).
4. Route the return hose and secure.
5. Remove the support and lower the vehicle.
6. Refill the power steering system.
