Raider 2WD V6-3.7L (2008)
5. Position new gasket (3) between EGR tube flange and EGR valve assembly.
6. Position EGR tube (1) to side of EGR valve. Position end of tube (6) into intake manifold. Install two bolts (2). Torque to 11 N.m (8.5 ft. lbs.).
7. Connect electrical connector (3) to top of EGR valve solenoid (1).
8. Install EVAP canister purge solenoid (2) by slipping assembly to tongue-type bracket (1).
9. Connect negative battery cable.
10. Using a diagnostic scan tool, erase any previously recorded DTC's (Diagnostic Trouble Codes).
