Raider 2WD V6-3.7L (2008)
7. Disconnect electrical connector (3) at solenoid (1).
8. Remove two EGR valve solenoid mounting bolts (2).
9. Remove solenoid (1) from engine.
10. Remove and discard gasket (1) located under EGR solenoid.
INSTALLATION - 3.7L
1. Clean gasket area (1) at rear of left cylinder head where it joins base of EGR valve.
2. Clean EGR tube where it joins EGR valve.
3. Position new gasket between EGR valve and cylinder head.
4. Position EGR valve to cylinder head. Install and tighten two bolts (2). Torque to 9 N.m (80 in.lbs.).
