Raider 2WD V6-3.7L (2008)
3. Select "Misc. Function".
4. Highlight "Learn ETC".
5. Select "Start".
6. Follow the on screen instructions. Select "Next" after each step. Select "Finish" after completing the last step.
NOTE:
-
Due to the PCM programming procedure, a DTC may be set in other modules (TCM, BCM, MIC, SKIM, etc.) within the vehicle, if so
equipped. Some DTC's may cause the MIL to illuminate. Check all modules using .ECU View. from the Home screen, record the DTC's, and
erase these DTC's prior to returning the vehicle to the customer. Erase any DTC's in the PCM only after all other modules have had their
DTC's erased.
-
The following step is required by law.
18. Type the necessary information on the "Authorized Modification Label" p/n 04275086AB and attach near the VECI label.
