Raider 2WD V6-3.7L (2008)
Intake Air Temperature Sensor: Service and Repair
SENSOR - INTAKE AIR TEMPERATURE
REMOVAL 3.7L V-6
The intake manifold air temperature (IAT) sensor (1) is installed into the air intake tube near the throttle body (2).
1. Disconnect electrical connector (3) from IAT sensor.
2. Clean dirt from intake manifold at sensor base.
3. Gently lift on small plastic release tab (3) and rotate sensor about 1/4 turn counter-clockwise for removal.
4. Check condition of sensor O-ring (2).
INSTALLATION 3.7L V-6
