Raider 2WD V6-3.7L (2008)
1. Pull the connector (2) out of the lever (1) just enough to grasp it.
CAUTION: Be careful not to bend the pins on the tow/haul overdrive off switch. Use care when installing the switch, as it is not indexed,
and can be accidentally installed incorrectly.
2. Install the tow/haul overdrive off switch (3) into the connector (2).
3. Push the tow/haul overdrive off switch (3) and wiring into the shift lever (1).
4. Install the tow/haul overdrive off switch retainer onto the shift lever.