mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Battery Tray|Service and Repair|Page 3883 > < Battery Cable|Description and Operation|Page 3879
Page 1
background image

Battery Tray: Service and Repair

BATTERY TRAY 

DESCRIPTION 

The molded plastic battery tray (3) is located in the left front corner of the engine compartment. On this vehicle, the battery tray also provides an
anchor point for the anti-lock brake controller (4) and the Integrated Power Module (IPM) (1). The battery hold down hardware is contained within
the battery tray.

REMOVAL 

1. Disconnect and isolate the battery negative cable.
2. Remove the battery.
3. Remove the Integrated Power Module (IPM) (1).

Battery Tray|Service and Repair|Page 3883 > < Battery Cable|Description and Operation|Page 3879