Raider 2WD V6-3.7L (2008)
6.
Select Enable Trailer Tow Outputs.
Click the check mark at the bottom of the page.
7.
This screen will appear advising:
"This routine will update the FCM/CGW configuration to either enable or disable the left and right trailer tow relay outputs. This is to only be
used in conjunction with Mitsubishi's Trailer Tow Kit."
NOTE:
Raider is not equipped with a tow kit for model year 2008, but it is factory equipped with the wiring harness connector for lighting a trailer.
Click the check mark at the bottom of the screen to continue.
8.
Confirm that the status is set to Enabled. If so, no further action is necessary. Click the Home icon at the bottom of the screen to return to the Main
Menu.
If the status is set to Disabled, change it by clicking on the check mark.
