Raider 2WD V6-3.7L (2008)
1. Install the pressure hose (2) to the vehicle.
2. Reconnect the pressure hose (2) at the gear (4). Tighten the tube nut to 31 Nm (23 ft. lbs.).
3. Remove the support and lower the vehicle.
4. Reconnect the pressure hose (2) at the pump (4). Tighten the tube nut to 31 Nm (23 ft. lbs.).
5. Refill the power steering system.
HOSES - INSTALLATION
RETURN HOSE - GEAR TO COOLER
1. Install the return hose to the vehicle.
2. Reconnect the return hose (6) at the cooler (1) with hose clamps.
3. Reconnect the return hose (6) at the gear (7). Tighten the tube nut to 37 Nm (27 ft. lbs.).
4. Route the return hose and secure.
5. Remove the support and lower the vehicle.
6. Refill the power steering system.