Raider 2WD V6-3.7L (2008)
Tie Rod End: Service and Repair
Inner Tie Rod End
INNER TIE ROD END - REMOVAL
1. Remove the outer tie rod end (2) with special tool C.3894. A or equivalent. Count the number of turns when removing, this will aid in setting the
toe after installation.
2. Remove the jam nut.
3. Remove the clamps (1) for the inner tie rod boot (2).
4. Remove the boot (2).
5. Install the special tool #10087.3 socket (1) and #10087.2 Tube (2) and remove the inner tie rod end.