mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Wheels and Tires|Description and Operation|Page 4496 > < Tire Pressure Sensor|Service Precautions|Page 4492
Page 1
background image

Tires: Description and Operation

TIRES - DESCRIPTION

TIRES

Tires are designed and engineered for each specific vehicle. They provide the best overall performance for normal operation. The ride and handling
characteristics match the vehicle's requirements. With proper care they will give excellent reliability, traction, skid resistance, and tread life.
Driving habits have more effect on tire life than any other factor. Careful drivers will obtain in most cases, much greater mileage than severe use or
careless drivers. A few of the driving habits which will shorten the life of any tire are:
^

Rapid acceleration

^

Severe brake applications

^

High speed driving

^

Excessive speeds on turns

^

Striking curbs and other obstacles

Radial-ply tires are more prone to irregular tread wear. It is important to follow the tire rotation interval. This will help to achieve a greater tread life.

TIRE IDENTIFICATION

Tire type, size, aspect ratio and speed rating are encoded in the letters and numbers imprinted on the side wall of the tire. Refer to the chart to decipher
the tire identification code.
Performance tires have a speed rating letter after the aspect ratio number. The speed rating is not always printed on the tire sidewall. These ratings are:
^

Q up to 99 mph

^

S up to 112 mph

^

T up to 118 mph

^

U up to 124 mph

^

H up to 130 mph

^

V up to 149 mph

^

W (consult the tire manufacturer for the specific speed rating)

^

Z more than 149 mph (consult the tire manufacturer for the specific speed rating)

An All Season type tire will have either M + S, M & S or M.S (indicating mud and snow traction) imprinted on the side wall.

TIRE CHAINS

Tire snow chains may be used on certain models. Refer to the Owner's Manual for more information.

RADIAL-PLY TIRES

Radial-ply tires improve handling, tread life and ride quality, and decrease rolling resistance.
Radial-ply tires must always be used in sets of four. Under no circumstances should they be used on the front only. They may be mixed with temporary
spare tires when necessary. A maximum speed of 80 KPH (50 MPH) is recommended while a temporary spare is in use.
Radial-ply tires have the same load-carrying capacity as other types of tires of the same size. They also use the same recommended inflation pressures.
The use of oversized tires, either in the front or rear of the vehicle, can cause vehicle drive train failure. This could also cause inaccurate wheel speed

Wheels and Tires|Description and Operation|Page 4496 > < Tire Pressure Sensor|Service Precautions|Page 4492