Raider 2WD V6-3.7L (2008)
NOTE: When installing the OD / Reverse piston belleville spring, orientate it such that it contacts a new surface on the piston.
1. Install the belleville spring and snap ring loosely onto the OD / Reverse piston (3).
2. Using an Arbor Press (1) and tool 8349-1 (2) compress the belleville spring just enough to install the snap ring.
NOTE: Install all new seals and O-rings onto the input shaft and input hub. The O-rings on the input hub are color coded. Be sure to install the
correct O-ring in the correct location.
