Raider 2WD V6-3.7L (2008)
5. Using Spring Compressor 8285 (2) and a suitable shop press (1), compress the low/reverse Belleville spring (3) and remove the split retaining ring
holding the Belleville spring into the low/reverse clutch retainer.
6. Remove the low/reverse Belleville spring (3) and piston from the low/reverse clutch retainer. Use 20 psi of air pressure to remove the piston if
necessary.
CLEANING
Clean the overrunning clutch assembly, clutch cam, and low-reverse clutch retainer. Dry them with compressed air after cleaning.
INSPECTION
Inspect condition of each clutch part after cleaning. Replace the overrunning clutch roller and spring assembly if any rollers or springs are worn or
damaged, or if the roller cage is distorted, or damaged. Replace the cam if worn, cracked or damaged. Replace the LR clutch retainer if the piston
bores or ID bushings are scored or damaged.
ASSEMBLY
