Raider 2WD V6-3.7L (2008)
Fluid Pressure Sensor/Switch: Service and Repair
Service Information - 42RLE
SENSOR - VARIABLE LINE PRESSURE - REMOVAL
1. Remove the valve body from the transmission.
2. Remove the electrical connectors from the pressure control solenoid (1) and the line pressure sensor (2).
3. Remove the screws (6) holding the pressure control solenoid (1) and line pressure sensor (2) to the valve body.
4. Remove the pressure control solenoid and line pressure sensor from the valve body.
SENSOR - VARIABLE LINE PRESSURE - INSTALLATION
