Raider 2WD V6-3.7L (2008)
3. Snap the cable into the steering column (1) bracket so the retaining ears are engaged and snap the cable eyelet onto the shift lever ball stud.
4. Raise the vehicle.
5. Place the transmission manual shift lever in the "PARK" detent (rearmost) position and rotate prop shaft to ensure transmission is in PARK.
6. Route the gearshift cable (1) through the transmission mounting bracket (2) and secure the cable by snapping the cable retaining ears into the
transmission bracket and snapping the cable eyelet on the manual shift lever (3) ball stud, RLE transmission equipped vehicles.
