Raider 2WD V6-3.7L (2008)
7. Route the gearshift cable (1) through the transmission mounting bracket and secure the cable by snapping the cable retaining ears into the
transmission bracket and snapping the cable eyelet on the manual shift lever (3) ball stud, RFE transmission equipped vehicles.
8. Lower vehicle.
9. Lock the shift cable adjustment by pressing the cable adjuster lock tab (3) downward until it snaps into place.
10. Check for proper operation of the transmission range sensor.
11. Adjust the gearshift cable and BTSI mechanism as necessary.
ADJUSTMENTS - GEARSHIFT CABLE
Check adjustment by starting the engine in PARK and NEUTRAL. Adjustment is CORRECT if the engine starts only in these positions. Adjustment is
INCORRECT if the engine starts in one but not both positions. If the engine starts in any position other than PARK or NEUTRAL, or if the engine
will not start at all, the transmission range sensor may be faulty.
Gearshift Adjustment Procedure
