Raider 2WD V6-3.7L (2008)
3. Clean and dry area of windshield opening to be re-glued with a suitable glass preparation solvent and rag.
4. Re-prime any damaged area. If old adhesive has been exposed for more than 12 hours, entire adhesive area needs to be re-primed.
5. Allow primer to air dry for at least 10 minutes.
Windshield Installation
1. Apply bead of adhesive (1) with a triangular nozzle directly to the windshield seal starting at bottom in center of windshield.
CAUTION:
-
Always apply bead of adhesive to the windshield.
-
Always install the windshield within 5 minutes after applying adhesive.