Raider 4WD V6-3.7L SOHC (2007)
Antenna Cable: Service and Repair
Antenna Cable - Instrument Panel
ANTENNA CABLE - INSTRUMENT PANEL
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the right cowl side trim panel.
3. Reach under the instrument panel outboard of the glove box to access and disconnect the antenna coaxial cable connector. Disconnect the
connector by pulling it apart while twisting the metal connector halves. Do not pull on the cable.
4. Disengage the instrument panel antenna cable from the retainer clips on the glove box opening and instrument panel support.
