Raider 4WD V6-3.7L SOHC (2007)
4. Remove HCU assembly (5) mounting bolts (1&6).
5. Raise and support the vehicle.
6. Lift the HCU assembly (5) off the battery tray (2).
7. Remove the HCU assembly (5) from the vehicle.
INSTALLATION
NOTE: If the ABM is being replaced with a new ABM it must be reprogrammed with the use of a scantool.
1. Reinstall the HCU assembly (5) to the vehicle.
2. Install HCU assembly (5) on the battery tray (2) and Tighten the nuts to 15 Nm (11 ft. lbs.).