Raider 4WD V6-3.7L SOHC (2007)
6. Position the camshaft drive gear onto the camshaft, remove oil from bolt then install the retaining bolt. Using Special Tools, Spanner Wrench 6958
with Adapter Pins 8346 (4) and a suitable torque wrench (1), tighten retaining bolt to 122 Nm (90 ft. Lbs.).
7. Remove Special Tool 8379.
8. Rotate the crankshaft two full revolutions, then verify that the camshaft drive gear V6 marks are in fact aligned.
9. Install the cylinder head covers.