Raider 4WD V6-3.7L SOHC (2007)
Control Assembly: Description and Operation
CONTROL - A/C HEATER
DESCRIPTION
The A/C-heater control (1) for the manual temperature control (MTC) single zone heating-A/C system allows one temperature setting for the entire
vehicle. All controls are identified by ISO graphic symbols.
The A/C-heater control and integral computer is located in the instrument panel and contains:
-
a push button A/C on/off control (2). The Snow flake button contains an LED that illuminates when the A/C system is in operation.
-
a push button rear window defogger on/off control (3). The defogger button contains an LED that illuminates when the rear window defogger
(EBL) system is in operation.
-
a rotary control knob for recirculation and mode control of the discharged air (4).
-
a rotary control knob for temperature control of the discharged air (5).
-
a rotary control knob for fan speed selection and turning the heating-A/C system off (6). The A/C-heater control cannot be repaired and, if faulty
or damaged, it must be replaced. The illumination lamps for the A/C-heater control are available for service replacement.
