Raider 4WD V6-3.7L SOHC (2007)
Housing Assembly HVAC: Overhaul
HOUSING - HVAC - DISASSEMBLY
HVAC HOUSING
NOTE: The HVAC housing must be removed from the vehicle and disassembled for service of the heater core, A/C evaporator, mode-air and blend-air
doors.
1. Remove the HVAC housing (1) and place it on a workbench.
2. Disconnect the HVAC wire harness (2) from the mode door actuators (3 and 4) located on the driver side end of the HVAC housing.
3. Remove the screws (5) that secure the mode door actuators to the HVAC housing and remove the actuators.
4. Disconnect the HVAC wire harness (1) from the evaporator temperature sensor (2) and the blend door actuator (3) located on the top of the HVAC
housing (4).
5. Remove the screws (5) that secure the blend door actuator to the HVAC housing and remove the actuator.
6. Remove the evaporator temperature sensor from the HVAC housing.