Raider 4WD V6-3.7L SOHC (2007)
All ESD sensitive components are solid state and a symbol is used to indicate this. When handling any component with this symbol, comply with the
following procedures to reduce the possibility of electrostatic charge build up on the body and inadvertent discharge into the component. If it is not
known whether the part is ESD sensitive, assume that it is.
1. Always touch a known good ground before handling the part. This should be repeated while handling the part and more frequently after sliding
across a seat sitting down from a standing position or walking a distance.
2. Avoid touching electrical terminals of the part unless instructed to do so by a written procedure.
3. When using a voltmeter be sure to connect the ground lead first.
4. Do not remove the part from it's protective packing until it is time to install the part.
5. Before removing the part from it's package ground the package to a known good ground on the vehicle.