Raider 4WD V6-3.7L SOHC (2007)
Hazard Warning Lamps: Description and Operation
DESCRIPTION
-
Hazard Warning Control - The multi-function switch hazard warning push button provides two detent positions (ON and OFF) to control the
hazard warning lamps.
OPERATION
-
Hazard Warning Control - The hazard warning push button of the multi-function switch is depressed to activate the hazard warning system, and
depressed again to turn the system OFF. When the push button is actuated, the multifunction switch provides an output to the EMIC, and the
EMIC responds by sending electronic hazard switch status messages to the Front Control Module (FCM) over the Controller Area Network (CAN)
data bus. The FCM then energizes and flashes or de-energizes both the left and right turn signal circuits to provide the visual hazard warning.