Raider 4WD V6-3.7L SOHC (2007)
3. Raise and support the vehicle.
4. Remove the pressure hose (2) at the gear (4).
5. Remove the pressure hose from the vehicle.
HOSES - INSTALLATION
RETURN HOSE - GEAR TO COOLER
1. Install the return hose to the vehicle.
2. Reconnect the return hose (6) at the cooler (1) with hose clamps.
3. Reconnect the return hose (6) at the gear (7) Tighten the tube nut to 37 Nm (27 ft. lbs.).
4. Route the return hose and secure.
5. Remove the support and lower the vehicle.
6. Refill the power steering system.
RETURN HOSE - COOLER TO RESERVOIR