Raider 4WD V6-3.7L SOHC (2007)
Then click on the check mark at the bottom of the screen.
7.
This window will pop up advising that the program will "Automatic search the data." Click on the check mark to continue.
8.
Select the programming database (calibration) listed in the "New ECU P/N" that matches the New Part # column from the chart shown at the
beginning of this TSB.
Then click on the check mark at the bottom of the screen.
9.
Click on the check mark to continue with reprogramming. It will take up to 10 minutes to complete reprogramming.
DO NOT DISTURB THE HARNESS CABLES OR CONNECTIONS. INTERRUPTION DURING PROGRAMMING REQUIRES THE
PROCESS TO BE RESTARTED.
DO NOT SHUT DOWN THE RAIDER STV PROGRAM AT THIS POINT. ECU DAMAGE WILL OCCUR.
