Raider 4WD V6-3.7L SOHC (2007)
11.
Click on the check mark to continue with reprogramming. It will take up to 10 minutes to complete reprogramming.
DO NOT DISTURB THE HARNESS CABLES OR CONNECTIONS. INTERRUPTION DURING PROGRAMMING REQUIRES THE
PROCESS TO BE RESTARTED.
DO NOT SHUT DOWN THE RAIDER STV PROGRAM AT THIS POINT. ECU DAMAGE WILL OCCUR. FOLLOW THE MUT-III
SCREEN DISPLAY MESSAGES TO RESTART THE PROGRAMMING PROCESS.
12.
When programming is complete, this screen will display. Turn the ignition key off.
You will then be prompted to turn it back on within 20 seconds.
After turning the key back on, you will be taken to the next screen. Be patient as this takes some time.
13.
Then this screen will display (2007 CA 2WD spec part # shown). Be sure to note the new part number and confirm that it matches the part number
from the chart shown in this TSB for the vehicle's specification.
14.
Click on the check mark in the window to continue.
