Raider 4WD V6-3.7L SOHC (2007)
WARRANTY INFORMATION
RAIDER PCM (ECU) SOFTWARE PART NUMBER CHART
Preliminary Steps
PRELIMINARY STEPS
1.
Check the underside of the hood to verify that there is no label previously installed to indicate that this TSB reprogramming has already been done.
2.
If addressing a torque convertor shudder as described in the Purpose section above, confirm using the MUT-III that the Torque Convertor Clutch
break-in has been completed.
Confirming TCC Break-In-Status
CONFIRMING TCC BREAK-IN STATUS
1.
On the MEDIC-II or MUT-III, select Raider STV at the top of the screen.
