Raider 4WD V6-3.7L SOHC (2007)
When the armed VTSS senses that the battery has been disconnected and reconnected, it enters the power-up mode. In the power-up mode the alarm
system remains armed following a battery failure or disconnect. If the VTSS was armed prior to a battery disconnect or failure, the technician or vehicle
operator will have to actively or passively disarm the alarm system after the battery is reconnected. The power-up mode will also apply if the battery
goes dead while the system is armed, and battery jump-starting is attempted. The VTSS will be armed until the technician or vehicle operator has
actively or passively disarmed the alarm system. If the VTSS is in the disarmed mode prior to a battery disconnect or failure, it will remain disarmed
after the battery is reconnected or replaced, or if jump-starting is attempted.
TAMPER ALERT
The VTSS tamper alert feature will pulse the horn 3 times upon VTSS disarming, if the alarm was triggered and has since timed-out (about 18 minutes),
or if the battery has been disconnected and reconnected. This feature alerts the vehicle operator that the VTSS alarm was activated while the vehicle was
unattended.
