Raider 4WD V6-3.7L SOHC (2007)
cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or inoperative buckle or
retractor.
Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the anchor is integral that
has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or faulty seat belt and child restraint
components with the correct, new and unused replacement parts listed in the Mitsubishi Parts Catalog.
NOTE: The right side of the rear center seat belt and retractor mounting bracket and the unique, keyed center seat belt lower anchor buckle/right
outboard occupant buckle unit are secured to the rear floor by a common screw, but the lower anchor buckle and the right outboard occupant buckle can
be removed from the mounting bracket and are serviced separately from the seat belt and retractor. The center anchor buckle and the right outboard
occupant buckle are serviced as a unit with their anchor brackets.
1. Lift upward on the forward edge of the rear center seat belt bezel (2) at the top of the cab back panel to release the snap features that secure the
bezel to the belt bracket (3).
2. Disengage the seat belt webbing (1) from the bezel by weaving it through the slot in the front of the bezel.
3. Tilt the bezel rearward and toward the back glass to remove it from the back of the belt bracket.
4. Disengage the head of the right outboard seat belt buckle from the elastic strap on the rear edge of the right rear seat cushion.
5. Lift the right rear seat cushion far enough to reach between the rear seat cushion and the rear seat back to access and unbuckle the rear center seat
