Raider 4WD V6-3.7L SOHC (2007)
Transmission Speed Sensor: Service and Repair
Service Information - 42RLE
Sensor - Input Speed
SENSOR - INPUT SPEED
REMOVAL
1. Raise vehicle.
2. Place a suitable fluid catch pan under the transmission.
3. Remove the wiring connector from the input speed sensor.
NOTE: The speed sensor bolt has a sealing patch applied from the factory. Be sure to reuse the same bolt.
4. Remove the bolt holding the input speed sensor to the transmission case.
5. Remove the input speed sensor from the transmission case.
INSTALLATION