Raider 4WD V6-3.7L SOHC (2007)
3. Install the upper control arm (4).
4. Reset the vehicle ride height.
5. Perform a wheel alignment.
LOWER CONTROL ARM SHOCK BUSHING
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure proper
operation during the removal and installation process.
1. Install the new shock bushing (4) into the lower control arm (3) using tools C-4212-F (Press) (1), 9653-3 (driver) (5), 9602 (Depth gauge) (2) the
depth gauge will automatically set the depth of the bushing (4) in the control arm (3).
2. Install the shock.
