mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Wheels and Tires|Description and Operation|Page 4904 > < Wheels and Tires|Description and Operation
Page 2
background image

Radial-ply tires must always be used in sets of four. Under no circumstances should they be used on the front only. They may be mixed with temporary
spare tires when necessary. A maximum speed of 80 KPH (50 MPH) is recommended while a temporary spare is in use.

Radial-ply tires have the same load-carrying capacity as other types of tires of the same size. They also use the same recommended inflation pressures.

The use of oversized tires, either in the front or rear of the vehicle, can cause vehicle drive train failure. This could also cause inaccurate wheel speed
signals when the vehicle is equipped with Anti-Lock Brakes.

The use of tires from different manufactures on the same vehicle is NOT recommended. The proper tire pressure should be maintained on all four
tires.

TIRE INFLATION PRESSURES 

WARNING:  OVER OR UNDER INFLATED TIRES CAN AFFECT VEHICLE HANDLING AND TREAD WEAR. THIS MAY CAUSE
THE TIRE TO FAIL SUDDENLY, RESULTING IN LOSS OF VEHICLE CONTROL.
 

Under inflation will cause rapid shoulder wear (1), tire flexing, and possible tire failure.

Over inflation will cause rapid center wear (1) reduction in the tire's ability to cushion shocks.

Improper inflation can cause:
^

Uneven wear patterns

^

Reduced tread life

^

Reduced fuel economy

^

Unsatisfactory ride

^

Vehicle drift

For proper tire pressure specification refer to the vehicles Owners Manual.

Wheels and Tires|Description and Operation|Page 4904 > < Wheels and Tires|Description and Operation