Raider 4WD V6-3.7L SOHC (2007)
Fluid Pressure Sensor/Switch: Service and Repair
Service Information - 42RLE
SENSOR - VARIABLE LINE PRESSURE
SENSOR - VARIABLE LINE PRESSURE - REMOVAL
1. Remove the valve body from the transmission.
2. Remove the electrical connectors from the pressure control solenoid (1) and the line pressure sensor (2).
3. Remove the screws (6) holding the pressure control solenoid (1) and line pressure sensor (2) to the valve body.
4. Remove the pressure control solenoid and line pressure sensor from the valve body.
SENSOR - VARIABLE LINE PRESSURE - INSTALLATION
1. Install the pressure control solenoid (1) and line pressure sensor (2) into the valve body.
2. Install the screws (6) to hold the pressure control solenoid (1) and line pressure sensor (2) to the valve body.
3. Install the electrical connectors to the pressure control solenoid (1) and the line pressure sensor (2).
4. Install the valve body into the transmission.