Raider 4WD V6-3.7L SOHC (2007)
Fluid Pressure Sensor/Switch: Service and Repair
Service Information - 45RFE/545RFE
SENSOR - LINE PRESSURE
REMOVAL
1. Raise vehicle.
2. Place a suitable fluid catch pan under the transmission.
3. Remove the wiring connector from the line pressure sensor (2).
4. Remove the bolt holding the line pressure sensor (2) to the transmission case.
5. Remove the line pressure sensor (2) from the transmission case.
INSTALLATION
1. Install the line pressure sensor (2) into the transmission case.