Raider 4WD V6-3.7L SOHC (2007)
11.
Then this screen will display (CA spec part # shown). Be sure to note the new part number. Click on the checkmark in the window to continue.
12.
Using a ball-point pen enter the new ECU part number this TSB number (TSB-07-23-005) your dealer code and the current date on the Engine
Compartment / Control Module Label (part no. MSSF-024G-00).
NOTE:
For Raider models, there is no vendor code or ROM ID to be recorded on the label.
13.
Carefully remove all dirt and oil from a vacant area near the VECI label on the underside of the hood and affix the Engine Compartment label.
The Control Module Label is NOT used. It can be discarded.
14.
Clear all DTCs as follows:
a.
Return to the Raider main menu and select Special Function.
b.
Select All DTCs
