Raider 4WD V6-3.7L SOHC (2007)
6. Hold flange with Holder 6719A and four bolts and washers.
7. Remove pinion nut.
8. Mark a line across pinion shaft and flange for installation reference.
9. Remove flange (1) with Puller C-452 (2).
10. Remove pinion seal with a seal pick.
INSTALLATION
1. Apply a light coating of gear lubricant on the lip of pinion seal.
2. Install seal with Installer C-3972-A (2) and Handle C-4171 (1).
