Raider 4WD V6-3.7L SOHC (2007)
6. Install two bolts into the companion flange threaded holes, 180° apart. Position Holder 6719A against the companion flange and install and tighten
two bolts and washers into the remaining holes.
7. Hold the companion flange with Holder 6719A and remove pinion nut and washer.
8. Mark a line across the pinion shaft and flange for installation reference.
9. Remove companion flange (1) with Puller C-452 (2).
10. Remove pinion seal with seal puller.
INSTALLATION
1. Apply a light coating of gear lubricant on the lip of pinion seal.
2. Install new pinion seal with Installer C-4076-B (3) and Handle C-4735 (1).
