Raider 4WD V6-3.7L SOHC (2007)
Seals and Gaskets: Service and Repair
Rear Axle - 8-1/4
SEAL - AXLE SHAFT
REMOVAL
1. Remove axle shaft.
2. Remove axle shaft seal (1) from axle tube (2) with a seal pick.
INSTALLATION
1. Remove any old sealer/burrs from axle tube.
2. Coat new seal lip with axle lubricant and install seal with Installer C-4198 (1) and Handle C-4171 (2).
3. Install axle shaft.
