mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Transfer Case - NV233 - M/T|Page 3830 > < Transfer Case - NV233 - M/T
Page 2
background image

Volts and it is also less than or equal to encoder_Neutral_max Volts.

^

2WD TARGET REGION - The position shall be considered 2WD if the voltage is greater than or equal to encoder_2WD_min Volts and it is also
less than or equal to encoder_2WD_max Volts.

^

2WD SHIFT LIMIT - During Phase 2 and Phase 3 shifting, shifts may become unidirectional when a voltage is greater than or equal to
encoder_2WD_min Volts has been reached.

The mode sensor position will be considered invalid by the FCM if the voltage is greater than or equal to encoder_High_Range_Limit Volts or if it is
less than or equal to encoder_Low_Range_Limit Volts.

Refer to MODE SENSOR VOLTAGES <NV233> table for the mode sensor voltages.

MODE SENSOR VOLTAGES<NV233>

Transfer Case - NV233 - M/T|Page 3830 > < Transfer Case - NV233 - M/T