Starion L4-2555cc 2.6L SOHC Turbo VIN N FI (1985)
Ignition Control Module: Testing and Inspection
Igniter Test
Fig. 4 Igniter test
Fig. 5 Applying battery voltage to igniter terminals
1.
Connect a 12V, 3-30 Watt test lamp between igniter and battery, Fig. 4.
2.
Using a 1.5 volt battery, apply voltage to igniter terminals, Fig. 5. If lamp lights when test circuit is completed, igniter is satisfactory. If lamp does
not light, igniter is defective.