mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Engine - Sag or Bucking Condition|Page 98 > < Engine - Sag or Bucking Condition
Page 2
background image

FIGURE 2

SERVICE PROCEDURE
1.

Disconnect the battery.

2.

Remove the glove box under cover and disconnect the in-car A/C sensor. See Fig. 2.

FIGURE 3

3.

Remove the right side cowl kick panel. Fig. 3.

FIGURE 4

4.

Disconnect and remove the ECI computer. Fig. 4.

Engine - Sag or Bucking Condition|Page 98 > < Engine - Sag or Bucking Condition